- RECLOSER COOPER
1. Instructions for testing, installing, installing and operating Recloser Cooper
2. Recloser Cooper Installation Checklist
3. Recommended to test Recloser
4. Installation recommendations for Recloser control cabinets using power from low voltage grid
5. Notes when storing control cabinets and Recloser
6. Check the current measurement signal of the FXD . cabinet
7. Check the Recloser does not cut with FXD . cabinet
8. Check that Recloser cannot be closed by FXD cabinet
9. Check FXD cabinet does not receive Recloser status, OPEN and CLOSE lights are not lit
10. Check that Recloser cannot be closed with cabinet F6
11. Recloser control cabinet Accu charger test procedure
12. Recloser test form NOVAi – FXD cabinet does not receive current
13. Trip diagram – Close Recloser with 4 batteries 12V
- HOT ELECTRICAL REPAIR TOOLS – HOTLINE TOOLS
1. Guide to storing tools Hotline
2. Test guide for 100kV withstand voltage pole – ASTM F711
3. Porcelain-shielded withstand voltage test instructions
4. Hard wire sheathing test guide
5. Test guide for standing porcelain coating
7. Soft wire sheathing test guide
8.1. Test guide for non-grooved insulating mats
8.2. Test guide for grooved insulating mats
9. Test guide for ropes and loaders
10. Guide to testing shoulders, insulating gloves
A. Applicable standards & periodic testing recommendations
C. Accessories to prepare for testing Hotline
- CUTTING KNIFE AND CONTROL BOX
1. Recommended transport and installation of circuit breakers and control cabinets
- MEDIUM AND HIGH VOLTAGE CAPACITOR BANKS
1. Instructions for checking and installing medium and high voltage capacitor banks